Daniel No Comments

Steam Sterilization – Important For Medical Services

 Steam sterilization is an important process which needs to be done for the wellbeing of patients who are admitted at various hospitals and other clinical institutes. Unclean and unhygienic instruments may result in fatal diseases which is why sterilization has become the need of the hour. Once a medical instrument has been properly cleaned and processed through steam sterilization, it is as good as new. Medical sterilization needs to be done for all the instruments that are used in medical checkups and other surgical procedures.

There are many different methods that have been used by different doctors for medical sterilization depending on the nature of instruments and the efficacy of the procedure. The method for sterilization should be clean and perfect and should be performed under the supervision of a sterilization expert. Steam sterilization is now a trusted sterilization method that is used on medical instruments to make them danger free and useable. The reason for going through the sterilization process is that every instrument needs to be cleaned once it has been used on a patient. Once a medical instrument has been used, it needs to be cleaned to make sure that it is not contaminated before using on another patient. When the sterilization process takes place and the instruments are cleaned they can be used again as new.

The medical sterilization process has to be done right after the instrument has been used. Some surgical instruments such as syringes cannot be used again, therefore these should be disposed of immediately. Medical instruments are quite expensive and in order to use them again, you have to sterilize them so that they do not cause any potential harm. For the cleaning of the medical instruments, you have to make them undergo the process of steam sterilization. This procedure cleans the medical instruments more effectively.

Steam sterilization is a process that every hospital and clinical institute should adopt. The medical instruments need to be put under the steam sterilization process to clean them properly because this procedure helps in getting rid of all microbial life on surgical instruments. There are other methods that need to be given importance but the steam process has a high success rate. Medical sterilization involves every process that takes away the germs from the medical instruments and uses them in a productive way. By using the sterilization process, we can easily use the most expensive instruments repeatedly. You can rest assured that they are danger free and cannot cause harm to anyone as they have been sterilized.

Daniel No Comments

How Medical Equipment is Sterilized – A Simple Overview

Ever wondered how medical equipment is sterilized? Ever wondered what the procedure for medical device cleaning and sterilization was? Well, here is a basic overview of medical instrument sterilization and cleaning. Mind you, different hospitals and clinics may have different or more specific approaches. However, this is a basic overview.

Frequent Cleaning

Whenever a medical instrument is used, it is constantly cleaned after every use. This ensures that blood or other infectious material or bacteria do not accumulate on the instrument. If that were to happen, it becomes even more difficult to remove the stains.

Thorough Cleaning with Steam

Even though medical equipment is wiped down after every use, medical device cleaning via steam is crucial for complete instrument sterilization. In most cases, sterilization using steam is a vital process that most hospitals employ to safeguard patient safety.

Instrument sterilization using steam leaves no harmful chemical residues and all microbes are destroyed.

Thorough Drying

After thorough cleaning, medical equipment is thoroughly dried. This is an important process for complete instrument sterilization. Proper medical device cleaning requires that equipment should be thoroughly washed and dried before it is put into an autoclave. Many hospitals use the process of sterilization via dry heat to dry medical instruments.

Putting Equipment in an Autoclave

Once equipment has been properly washed and dried, it is then put into an autoclave. It is here that more heat, steam and high pressure is used to truly ensure proper instrument sterilization. Each instrument is placed approximately 1 inch away from each other and the machine is closed and the sterilization is allowed to continue for the validated cycle.

Maintain a Log

Once instrument sterilization has been achieved, it is vital that a medical device cleaning and sterilization log is maintained. Documentation is critical for compliance of the necessary steps required to achieve patient safety.

For more information, visit www.gibraltarlabsinc.com.

Daniel No Comments

Medical Device Cleaning – A Guide for Patients

Normally, our doctors know practically everything there is to know about the field of medicine. However, it is just as crucial for us, as patients, to also be aware of many medical practices. One such practice is medical device cleaning. Here is a closer look at why it is important and a few ways in which it is carried out.

Why is Sterilization even Necessary?

One of the biggest questions asked is why medical sterilization is important. If hot water is supposed to clean most of the bacteria, why are fancy machines such as an autoclave used for sterilization? The simple answer is that hot water alone does not remove or sterilize everything.

Many chemicals are used to sterilize medical equipment. This is because some bacteria are only destroyed by a certain chemical, level of heat, pH range, etc. The hospital cleaning staff usually uses bleach, detergents and various machines to sterilize equipment.

Sterilizing by using an Autoclave

An autoclave is a machine that uses very high heat, pressure and jets of steam to ensure thorough medical sterilization. The best thing about an autoclave is that complete medical device cleaning can be achieved in as little as 2 minutes, depending on the size and efficiency of the autoclave.

Sterilization by Dry Heat

As the name implies, dry heat is used to sterilize equipment. Initially, the medical equipment that needs to be sterilized is washed and dried completely. Usually, a high heat mechanical convection oven is used for dry heat medical sterilization. Blasts of dry heat are blown over medical equipment. Any bacteria still on the medical equipment are destroyed because the high temperature of the dry heat coagulates their blood proteins.

Sterilization by Chemicals

When it comes to medical device cleaning, many chemicals are used to clean the devices and remove any traces of bacteria. For example, bleach is a common chemical used to remove bacteria from medical equipment.

Medical device cleaning is taken very seriously in the medical field. Whether it is your surgeon, dentist or doctor, they will always ensure that all of their equipment is properly sterilized before they are used. This is because they know the complications of incomplete medical sterilization. In fact, they are required by law to sterilize their equipment after each use. This is one reason why autoclaves are highly popular in almost every hospital or clinic, big or small.

To know more about medical device cleaning, please visit https://www.gibraltarlabsinc.com/